- Sun Nov 05, 2023 12:08 am
#245045
I have my ESP-Prog board connected to a micromod datalogger board and Platformio configured with the correct driver. However, compiling for debugging I get the message:
embedded:startup.tcl:26: Error: Can't find board/None
in procedure 'script'
at file "embedded:startup.tcl", line 26
.pioinit:11: Error in sourced command file:
Here is the ini file:
[env:sparkfun_esp32micromod]
platform = espressif32
board = sparkfun_esp32micromod
framework = arduino
build_flags = -I ../Sensors
upload_port = com10
monitor_speed = 115200
debug_tool = esp-prog
upload_protocol = esp-prog
debug_init_break = tbreak setup
lib_deps =
SPI
It would seem the Sparkfun micromod esp32 board file is not setup for debugging in Platformio. Is there a recommended fix for this or must I go look for other esp32 boards that are supported.
Regards, Ron
embedded:startup.tcl:26: Error: Can't find board/None
in procedure 'script'
at file "embedded:startup.tcl", line 26
.pioinit:11: Error in sourced command file:
Here is the ini file:
[env:sparkfun_esp32micromod]
platform = espressif32
board = sparkfun_esp32micromod
framework = arduino
build_flags = -I ../Sensors
upload_port = com10
monitor_speed = 115200
debug_tool = esp-prog
upload_protocol = esp-prog
debug_init_break = tbreak setup
lib_deps =
SPI
It would seem the Sparkfun micromod esp32 board file is not setup for debugging in Platformio. Is there a recommended fix for this or must I go look for other esp32 boards that are supported.
Regards, Ron