SparkFun Forums

[Jack]

Hallo.
By loading a program:
No device found on COM6
Failed uploading. uploading error: exit status 1
How can I fix this problem?
Jack.

[paulvha]

There are a number of posts about missing com-port/ failing to upload on the Arduino Forum (e.g. https://forum.arduino.cc/t/device-not-s ... 1142476/83)
Check whether that helps.

[JCCSAR]

Examples downloaded need to be updated to include Wire1 and not Wire

Wire1.begin(); //Join I2C bus
also
if (button.begin(SFE_QWIIC_BUTTON_DEFAULT_ADDRESS, Wire1) == false)