- Tue Jun 27, 2023 3:25 pm
#242174
Hi,
I have this carrier board:
https://learn.sparkfun.com/tutorials/mi ... -guide/all
and this MicroMod STM32:
https://learn.sparkfun.com/tutorials/mi ... okup-guide
I tried to add board definitions for the STM32, but while typing SparkFun STM32 in Boards Manager, they are not there. I tried the STM32F405 with this board definitions, but no luck
https://github.com/stm32duino
With this last, I set everything accordingly to your guidelines, but it says that establishing a connection with the device failed. The board when connected to a PC over the USB C does not show up. While I press the RST and hold the Boot pressed, It shows up as STM Device in DFU mode.
Some help would be nice
I have this carrier board:
https://learn.sparkfun.com/tutorials/mi ... -guide/all
and this MicroMod STM32:
https://learn.sparkfun.com/tutorials/mi ... okup-guide
I tried to add board definitions for the STM32, but while typing SparkFun STM32 in Boards Manager, they are not there. I tried the STM32F405 with this board definitions, but no luck
https://github.com/stm32duino
With this last, I set everything accordingly to your guidelines, but it says that establishing a connection with the device failed. The board when connected to a PC over the USB C does not show up. While I press the RST and hold the Boot pressed, It shows up as STM Device in DFU mode.
Some help would be nice