- Wed Jan 17, 2024 1:17 pm
#246462
I've seen a few posts specific to the Artemis black board but nothing specific to the Artemis Thing Plus.
At idle see about 5mA of current draw from the Thing Plus.
When I load Example3_WDT_LowPower.ino using Arduino IDE 2.2.1 - I don't see any change in current draw. Still 5mA.
Is there a specific configuration for the Artemis Thing Plus board I should be setting?
Thanks in advance.
At idle see about 5mA of current draw from the Thing Plus.
When I load Example3_WDT_LowPower.ino using Arduino IDE 2.2.1 - I don't see any change in current draw. Still 5mA.
Is there a specific configuration for the Artemis Thing Plus board I should be setting?
Thanks in advance.